Welcome! As a new user of Replit Ask, we hope you will find this site intuitive and clearly structured, but here is some guidance to get you started:
Here are some very basic terms that will be helpful to keep in mind as you use Discourse or read this guide:
Discourse: Replit Ask uses open-source software called Discourse. Replit Ask and Discourse may be used interchangeably in these guides.
Category (Cat): The primary means of organizing topics. Each topic is placed in exactly one category. You can also configure notification preferences per category or even mute them as explained below. Categories are a similar concept to a ‘forum’ on other sites.
Tag: A marker placed on a topic to describe it. While a topic can only have one category, it can have multiple tags. New tags can be created by some users. You can read more about the differences between tags and categories.
Topic: The collection of messages grouped together in a meaningful conversation, with a title, listed in a category, beginning with an Original Post, and including all replies in chronological order.
Elsewhere this might be called a ‘thread’ but Replit Ask uses ‘topic’ since thread is used for linked elements that can go off in many different directions (and be confused with programming terms).
Post/Reply: Each element of a topic is referred to as a post or reply. Each post has its own author and can be moved to a different topic if necessary, or even become the start of a new topic if a moderator or a Leader thinks it is better somewhere else.
OP: OP Can stand for 2 things. It can either stand for the original post on any topic or the original poster.
User: Replit Ask is public for anyone to read, but you will always be required to register in order to create posts and record any actions such as bookmarking, liking, tagging, and flagging. Most site activity, therefore, is based around registered Users.
Trust Level (TL): Trust levels are a brought estimate on how much a user is trusted. The lowest is TL0 which doesn’t have a name, then TL1 is called Basic, TL2 is called Member, TL3 is called Regular, and TL4 is called Junior Moderator/Leader.
By default, the Discourse homepage will show all Latest conversations in the community but you can filter this list in a number of ways:
By category: in the menu line, click the ‘all categories’ title and a list of all the categories appears.
By tag: in the menu line, click the ‘all tags’ title and a list of all the tags are used will appear.
By level of activity: if you click on ‘Top’ the conversation topics will be listed in order of most activity (views and replies) for a specific time period. You can choose whether this is for all time, or select a specific period such as quarter, month, week or just today.
By what’s “New” to you: by default, new topics are those created in the last 2 days that you have not opened yet to keep the list fresh and relevant. New topics show a small blue dot next to the topic title
By what topics are “Unread”: by default, unread topics are those that you have previously opened and read for at least 4 minutes, and that have new posts (replies) submitted to them. Unread topics show a number in a blue circle indicating how many new posts are in the topic.
There are several ways to see who is involved in topics.
On the homepage you will see a selection of avatars (profile pictures) of:
- the user who started the topic (always the first photo);
- a selection of the most active participants;
- and, who created the most recent post (usually the last photo).
- in some cases, the first photo has a blue border or blue halo to indicate that the original poster is also the most recent poster
The box at the bottom of the OP tells you; who created the post and when, gives a count of the replies and views in this topic to date, and a display of the avatars of the most frequent participants.
- For Search, the Menu, or your User page, use the icon buttons at the upper right.
A healthy community needs members to be posting new content, but this activity is not everything. Readers are the true indicators of how healthy the community is. What’s the point of posts that no-one reads? Discourse encourages and tracks reading habits so community managers can keep a healthy balance.
Click a topic title and read down the list of replies in chronological order, following links or previewing replies and quotes as you go. Use your mouse to scroll the screen, or use the timeline scroll bar on the right which also shows you how far through the conversation you’ve read. On smaller screens, select the bottom progress bar to expand it.
- Selecting a topic title will take you to your last read post in the topic. To enter at the top ↑ or bottom ↓ instead, click the reply count or last reply date.
- Topics above the light red line on a list are new or updated since your last visit. If you have read all the way to the end of a topic, the title will be light grey instead of black.
Sometimes conversations are clearer if topics are split, where posts are moved to a more appropriate topic, or two related topics are merged. If a post is moved, a link will appear that will allow readers to jump to that comment wherever it has been moved to, and the person who posted it will also be notified.
At the end of the OP you will also see lists of related topics that link to the one you are reading
Press any Reply button to open the editor panel at the bottom of your browser. You can continue reading (and even search or navigate to different topics) while you compose your reply.
Discourse shows all posts in the order they are published. It does not make you chase down multiple threaded paths. However, it still gives you lots of ways to follow the context of conversations.
To reply to a specific post in a topic, clicking the grey Reply button at the end of each post and your reply is linked to that post.
- If your reply is the next one published after the post you are replying to, this will appear next in chronological order
- If yours is NOT next, then two things happen after your post is published:
- Your post will include a new link in its header with an image to show what this is ‘in reply to’ - clicking this link displays that previous post for context next to your reply
- The original post includes a count of replies at the bottom - clicking this link displays the content of the replies
Drafts will automatically be saved as you write. If you minimise the editor or navigate to a different topic, the editor might disappear. To open a draft, return to the topic you were replying to or click the highlighted bar at the bottom of your browser, and the editor will reappear with your draft.
To insert a quote, select the text you wish to quote, then press the Quote button that pops up. There is no need to quote a whole message: it helps to be specific. Repeat this for multiple quotes even from different posts and different users. The quoted text will point to their original source.
To notify someone about your reply, mention their name. Type
@ to begin selecting a username. This search will also search the name fields in case you don’t know a particular username.
To use standard Emoji, just type
: to match by name, or traditional smileys
Alternatively, click on
more to see a complete list of emoji to select from.
Read details about this feature in: Create rich link previews with Onebox - users - Discourse Meta
To generate a summary for a link, paste it on a line by itself. To start a topic with a link, paste the link into the title field.
Your reply can be formatted using simple HTML, BBCode, or Markdown:
This is <b>bold</b>. This is [b]bold[/b]. This is **bold**.
For more formatting tips, try our 10 minute tutorial.
There are action buttons at the bottom of each post:
- To let someone know that you enjoyed and appreciated their post, use the like button. You can also use reactions to react to a post with more options than just the Like heart. Share the love!
- Grab a copy-pasteable (permalink) link to any reply or topic via the link button.
- Use the … button to reveal more actions: Flag to privately let the author, or the site staff, know about a problem. Edit to edit your post, if possible. Bookmark to find this post later on your profile page:
When someone is talking directly to you – by replying to you, quoting your post, mentioning your
@username, or even linking to your post – a blue number will immediately appear over your profile picture at the top right.
When you have been sent a Personal Message you will receive this in your Inbox and a green number will appear over your profile picture to the left.
Click your profile image to scroll through all your notifications.
You can optionally receive all these notifications as push notifications to your desktop browser or Android device. Simply allow the site to send you notifications through your browser when it asks permission.
Don’t worry about missing a reply — you’ll be emailed any notifications that arrive when you are away.
If you want, you can get notified about other things happening on the site as well, either at the category or topic level.
You can change your notification level for any individual topic via the notification control at the bottom of each topic:
or at the end of the timeline on the right of the topic, if the topic is long:
Notification level can also be set per category. To change any of these defaults, see your user preferences, or visit the category page, and use the notification control above the topic list, on the right side: